What to Choose? Gaming Beast or Productivity Workhorse

Application usage should guide hardware selection.

Application usage should guide hardware selection.

The Dell Precision 5550 is a highly customizable mobile workstation. Image courtesy of Dell.


By day, Travis North is a senior distinguished engineer at Dell with a focus on power and performance. He is a regular user of Siemens Simcenter Flotherm. When doing a thermal analysis, North says the software calculates “tens of millions” of cells to solve for mass momentum energy. 

He uses a Dell Precision 5550 mobile workstation, and he says it “grinds on the model” to get results down to 0.01 mm. It takes several iterations, and “every iteration must run on every cell.” The software makes heavy demands of the CPU, graphics processing unit (GPU) and memory/storage subsystem. 

But by night, North is an avid gamer. He uses an Alienware gaming mobile, which he describes as a “mustang.” Gaming computers are almost always running in overclock mode, which means the CPU and memory settings have been adjusted to run at speeds higher than their official rating. 

“The risk is occasional blue-screening,” North says. “There is also a higher risk of calculation misses and software failures. Overclocking and overvoltage can mean buying a new system in two years instead of four.” Gamers take the chance in exchange for extreme performance. 

Games are CPU intensive, and most serious gaming rigs have high-end CPU cooling units. The GPUs are important, but not as important as they are for engineering applications. 

“It is often fifty-fifty on CPU and GPU use,” North says, in contemporary engineering applications; more so for simulation and analysis applications than for design. “These programs run multiple threads and are very active.” 

Would North use a gaming computer for Flotherm? Not likely. “Gaming systems have more horsepower because of overclocking, but using them runs the risk of losing data or having a calculation failure. 

“It’s too risky for [computational fluid dynamics] (CFD),” North continues. “The cost of failure is high.” A single user could run Flotherm from a gaming unit, but there are risks due to the complexity of CFD. The big issue is stability. “To say, ‘Hey, I’ll overclock a workstation’ runs a high risk of software errors, too high for 12-hour simulation runs.” 

Users Not so Sure

To get a different perspective, we posted an open-ended question on LinkedIn about the use of gaming PCs vs. engineering workstations. None of the 14 respondents mentioned the use of CAE; most were running Autodesk Revit, McNeel and Associates Rhino 3D, and various rendering tools favored in the architectural community. Most said they owned gaming PCs. 

Steve Bennett with Taylor Design uses an Alienware M51 17-in. mobile to run Revit and virtual reality (VR) content creation tools. 

“It’s great to be able to overclock it when I want to, and to run normal power and fan levels when not needed,” he says. “When fans are at full load, it sounds like it will levitate.” 

Michael Freiert with Pope Architects says several members of his team use an MSI GS66 Stealth, a gaming mobile equipped with an NVIDIA GeForce RTX 30 series GPU and an 11th-Gen Intel Core i9. 

“Mixed results” is how Freiert describes the experience. Several units needed the fan replaced. “I’d be willing to try them again on the right users, but not every user in an office needs a punchy machine,” Freiert says. “There are some great gaming devices, but you have to look under the hood.”

A few of the users thought the terms “gaming PC” and “engineering workstation” were just marketing speak, and not useful in helping the customer make a purchasing decision. Akash Asagaonkar, a software trainer and consultant with expertise in engineering and rendering, disagrees. 

“Before buying any workstation, please make a note to avoid buying gaming workstations,” says Asagaonkar. He recently did a comparative benchmark using the same computer but switching between a GPU sold for gaming and one designed for high-end rendering. “Graphics cards designed for rendering are far better than graphics cards designed for gaming.” 

Missing the Point

Users who dismiss the idea of workstations and gaming PCs as separate categories miss the point, says Randy Copeland, president of Velocity Micro, a boutique computer vendor that offers workstation and gaming models. 

“We look at the intended use. Single-threaded vs. multi-threaded is the place to start. It all goes back to the application,” he says. 

Copeland says it is equally common for engineers to ask about gaming PCs and gamers to ask about workstations. NVIDIA and AMD have GPUs for workstations and for gaming; Copeland says it can be a big mistake to mismatch them to the application. 

Velocity Micro sells gaming PCs and workstations, and prefers to match computer specifications to the customer’s specific applications. Image courtesy of Velocity Micro. 

“We run into ‘microns vs. feet’ issues,” he says. 

One large construction client came to Velocity because their current gaming PCs were giving unusual errors. “Two walls were supposed to be 200 feet apart. But the computer was causing design errors” and the distances were off, Copeland says. 

“If you make parts that don’t fit because of the GPU, you won’t make that mistake twice,” Copeland says. “There is a considerable cost difference between an NVIDIA Quadro [for workstations] and an NVIDIA GeForce [for gaming and content creation]. If a mistake costs a fortune, don’t cut corners.”

Velocity Micro is noted in the industry as one of the first vendors to ship overclocked PCs. “We are the granddaddy of overclocking,” Copeland claims. “We have experience and specific intellectual property in it.” But he doesn’t recommend it for engineering applications. “Precision can be affected by overclocking, [there are] minute calculation issues.” 

Copeland says many of the components are the same in both classes of computer, “but we have to consider reliability.” Velocity Micro has military and academic customers who will spend extra on a power supply that would be overkill for a gaming PC. 

“The differences are small but they are important,” he says. 

Benchmark It

Several of our interview subjects mentioned the need for customers to do their own benchmarking before they choose a new system, especially if it is a large purchase. Most often mentioned were SYSmark 25, a commercial product; the various benchmark applications from SPEC (Standard Performance Evaluation Corporation), free to end users; and Cinebench. 

SPEC is a nonprofit consortium that promotes use of workstation performance benchmarks for a variety of applications including engineering. It offers various testing applications to end users and manufacturers. Image courtesy of SPEC. 

SYSmark comes with several industry-standard productivity applications on a 5-day license. Cinebench tests rendering and display capabilities with its own internal simulations. It is free, even though it uses the rendering engine found in Maxon Cinema 4D. PCMark, another popular benchmark application, tests with open-source software, so there are no licensing issues.

More Dell Coverage

How to Configure the Right Engineering Workstation
Learn how key workstation components can impact engineering productivity, and what factors to consider when configuring a new engineering workstation.
GPU-Powered Multi-Application Workflows
Engineers increasingly need to multitask on their workstations. NVIDIA RTX™ GPUs provide the power needed for modeling, simulation and rendering workflows.
Simulating Clean Energy
The U.K.’s Atomic Energy Authority and University of Manchester are using NVIDIA Omniverse Enterprise to develop a fusion reactor power plant.
Dell Precision Tower Powered by 64-Core Threadripper PRO CPU
New professional workstation allows engineers to simultaneously design and render via fast CPU, support for high-end GPU graphics.
Engineering Workstation Power on the Go
New Dell Precision mobile workstations include new form factors, expanded support for NVIDIA RTX™ technology, and faster processors.
NVIDIA RTX™ GPU Power in the Toy Box
Designer Alessandro Pasotti leverages a Dell Precision workstation and NVIDIA RTX™ technology to boost his performance by as much as 20%.
Dell Company Profile

More MSI Coverage

MSI Company Profile

More NVIDIA Coverage

Share This Article

Subscribe to our FREE magazine, FREE email newsletters or both!

Join over 90,000 engineering professionals who get fresh engineering news as soon as it is published.




About the Author

Randall  Newton's avatar
Randall Newton

Randall S. Newton is principal analyst at Consilia Vektor, covering engineering technology. He has been part of the computer graphics industry in a variety of roles since 1985.

  Follow DE
#25888